Savant commercial office lighting installation
Commercial light, specified clearly

Savant lighting choices without procurement friction

Compare commercial indoor luminaires and connected controls through the parameters that matter: luminous flux, CCT, CRI, mounting, optical distribution and dimming interface.

Explore productsOpen Quick Select
1989Established
37 yearsLighting experience
28Countries served
2,400+Team members
Specification frame

Review performance by requirement group

Values vary by family and configuration. Confirm the current product sheet and applicable test conditions before schedules are issued.

Light and visual quality

Luminous fluxProject-matched lumen packages; verify delivered lumens per configuration.
CCT and CRITypical selection paths include 3000 K, 3500 K or 4000 K and Ra 80 or 90+.
OpticsBeam angle, candela distribution, UGR context and spacing criteria require application review.

Electrical and controls

Dimming0-10V and DALI-2 availability is family-dependent; match driver, sensor and control topology.
Power qualityConfirm power factor, total harmonic distortion and emergency-driver compatibility.
DocumentationUse IES or LDT photometry with current installation geometry for calculations.
Selection notes

Questions that prevent late-stage substitutions

Not by itself. Higher luminous efficacy can lower connected load, while visual comfort may require a different distribution, lower UGR, higher CRI or reduced source luminance. Evaluate energy and occupant criteria together.

Centralized architecture simplifies common policies and monitoring. Distributed controls can improve zone flexibility and fault isolation. Confirm network boundaries, commissioning ownership and future expansion before choosing.

No. Output, optics, shielding and mounting can change distribution. Use the IES or LDT file associated with the exact family configuration and document assumptions in the calculation package.

Move from fixture name to verified selection

Send the room type, target illuminance, ceiling condition and controls requirement.

Start a project review